XPEL Ultimate Plus is warrantied for 10 years against yellowing, staining, delaminating, cracking , peeling and bubbling.
Yes, however you should always test a small spot before applying to the entire surface. Only use waxes that don't contain Naptha or Kerosene in concentrations over 5% and avoid waxes that contain dyes. For best results we recommend an XPEL Fusion ceramic coating application to keep your film looking good as new without the hassle of waxing!
Yes, the process is the same as on regular paint and won't damage the film.
Yes, however wait 48 hours after the install in order for the film to fully cure and adhere to your vehicle. We recommend keeping the spray at least 12 inches from the film and avoid spraying directly on the seams as much as possible.
Yes you can, but hand washing is always the best method for caring for your car! If you do use an automatic car wash, wait at least 48 hours after the film has been installed, and choose a touch-less car wash whenever possible.
Yes! However we recommend a matte finish as the gloss finish can cause the chrome to be distorted.
The self healing layer of the film is approximately 13 microns thick, if this layer is penetrated the film cannot self heal and will need to be replaced.
No, your paint is completely safe! However we always recommend having the film removed by a professional at Ricochet!
Yes, in fact we recommend it!
Seams are generally not visible at first glance and can only be seen if looking closely. Some paint colours such as black make the seams more visible, to avoid any visible seems we recommend full panel coverage.
Yes it can, both gloss and satin finishes can be applied to certain surfaces in the interior, if you are interested in interior protection contact us today for a quote!
No, window films are applied to the inside of the glass for maximum durability.
Yes, we recommend leaving your windows rolled up for 24-36 hours after installation to allow the film to fully cure and adhere to the window.
Wait one week before cleaning the windows, then use only non-ammonia based window cleaners and a soft microfibre cloth. Never scrape the film with any type of blade or use anything abrasive as it will scratch the film.
Film percentage stands for visual light transmission (VLT) or the amount of light allowed through the film, the lower the percentage, the darker the film. With XPELS technology you can achieve all the benefits of tint without having to darken the film!
XPEL offers a lifetime warranty that covers cracking, peeling, bubbling, delimitation, fading and colour change of the film. Ever have an issue, just let us know and we'll take care of it!